Aligning The Print Heads - Pitney Bowes SendPro P Series User Manual

Maintenance
11. Push the blue latch back until it stops.
12. Close the printer cover. The system will begin to prepare the print head. This process may take
several minutes.
13. Once the print head preparation is complete, you will be prompted to print a test pattern on an
envelope. Place an envelope on the feed deck and select Start.
14. Check the test pattern. If the lines are solid and unbroken, the pattern is acceptable. Select
Image is OK - Done.

Aligning the print heads

If your system has a color printing module, you should perform a print head alignment after you
replace the print heads. The print head alignment can be done for both envelope and tape, envelope
only or tape only.
You will need four or more envelopes of the same size to perform an envelope alignment.
1. Select Settings under Mailing on the Home screen.
2. Select Hardware.
3. Select Printer.
4. Select the Print head tab.
Pitney Bowes User Guide April 2022 212