Adjusting The Led Pointer For Positioning Marker Embroidery Foot Pm - Janome Continental M17 Instruction Book

u
w
Adjusting the LED pointer for positioning marker
embroidery foot PM
You can adjust the brightness and position of the LED
pointer.
Press the adjust key to open the adjusting window.
q Adjust key
* You can also adjust the brightness of the LED pointer
and the position of the LED pointer on the middle touch
screen.
w Middle touch screen
Adjusting the brightness of LED pointer
You can adjust the brightness of the LED pointer with the
LED pointer brightness key.
q
Press "+" or "–" key, or slide the slide bar up or down to
adjust the settings. Press the default key to recover the
original setting.
Press the close key to close the window.
e LED pointer brightness key
i
t Slide bar
r
u Default key
i Close key
t
Adjusting the LED pointer position
y
The LED pointer may not highlight the needle drop
position properly when attaching heavyweight fabrics to
e
the hoop. In this case, turn the handwheel or thumbwheel
and check the actual needle drop position, then adjust
the LED pointer position with the LED pointer adjustment
key.
Press "+" or "–" key, or slide the slide bar up or down
to adjust the settings. Press the default key recover the
original setting.
Press the close key to close the window.
r LED pointer adjustment key
y Slide bar
u Default key
i Close key
NOTE:
• You can also change the setting with "+" or "–" key
and slide bar on the middle touch screen.
• You can also press the default key and the lockout
key on the middle touch screen.
u Default key
o Lockout key
r
u
t
o
y
e
19