Couching Design With Water Soluble Stabilizer; Sewing Embroidery Design Patterns Sq10D#113 And Sq10D#114 - Janome Continental M17 Instruction Book

z
x
z
q

Couching design with water soluble stabilizer

You can sew on the water soluble stabilizer when
selecting design pattern RE20d #266 or SQ28d #177.
z Attach the water soluble stabilizer to the hoop and set
the hoop to the carriage.
Select design pattern RE20d #266.
x Sew the design on the water soluble stabilizer. Refer
to pages 73-75 for how to sew.
Remove the stabilizer from the hoop.
Cut off the excess of the water soluble stabilizer
surrounding the design pattern with scissors. Remove
the stabilizer by soaking the design in a bowl of warm
water.
Be sure that the lace piece to be attached is
completely dried out after removing from water.
NOTE:
• Do not rub or scratch the Designs for water soluble
stabilizer.
• Refer to page 37 for how to use a water soluble
stabilizer.
Sewing Embroidery Design Patterns SQ10d#113
and SQ10d#114
The left side of design pattern SQ10d #114 is designed to
fit design pattern SQ10d #113.
You can connect design patterns SQ10d #113 and SQ10d
#114 as if sparrows are huddled together.
z Place design pattern SQ10d #114 to the right side of
SQ10d #113.
w
You can add extra sparrows (design pattern SQ10d
#114) by placing design pattern SQ10d #114 to the
right side of the sparrow.
* Change the sewing order to start from the rightmost
sparrow for better sewing results (refer to page 84).
q Design pattern SQ10d #113
w Design pattern SQ10d #114
76