Attaching The Embroidery Foot; Attaching Couching Foot Pc-1 Or Pc-2 - Janome Continental M17 Instruction Book

z
q
w
x
r
t
c
y
v
q
e

Attaching the Embroidery Foot

Use embroidery foot P or positioning marker embroidery
foot PM (refer to the next page) for embroidery. Attach
the couching foot when sewing a couching design.
CAUTION:
Always make sure to press the lockout key to lockout
the machine before replacing the presser foot.
z Turn the power switch on.
Raise the needle by pressing the needle up/down
button.
Press the lockout key and raise the presser foot with
the presser foot lifter.
q Needle up/down button
w Lockout key
e Presser foot lifter
x Loosen the thumbscrew with the screwdriver and
remove the foot holder.
r Thumbscrew
t Foot holder
c Attach embroidery foot P to the presser bar from
behind. Tighten the thumbscrew partially by hand.
y Embroidery foot P
v Tighten the thumbscrew securely with the screwdriver.

Attaching couching foot PC-1 or PC-2

Attach couching foot PC-1 or PC-2 to the presser bar.
Tighten the thumbscrew firmly with the screwdriver.
q Thumbscrew
17