Janome Continental M17 Instruction Book page 28

!0 !0
!1
Setting the spool of thread or thread cone (special
size)
Use the spool holder (special) to hold the specific size of
o
the spool of threads as shown.
The sizes of the spools of thread are as follows:
The hole diameter of the spool has a range of 3/8˝ to
7/16˝ (9.5 to 10.5 mm), and the spool length has a range
of 2 3/4˝ to 3˝ (70 to 78 mm).
o Spool holder (special)
!0 Hole diameter (3/8˝ to 7/16˝)
!1 Spool length (2 3/4˝ to 3˝)
Firmly insert the spool holder (special) into the hole and
hold the spool as illustrated.
Bobbin winding while working on a sewing project
There are 2 spool pins on the machine.
You can wind the bobbin without removing the needle
thread while embroidering.
Place a spool of thread on the spool pin and fix the spool
with the spool holder as shown.
24