Korg D1200 Owner's Manual page 117

cursor to the date or time field you want to edit, and
turn the [VALUE] dial to set the date and time.
Press the [YES/OK] key to apply the specified date and
time, or press the [NO/CANCEL] key to discard the
changes you made.
The D1200 does not support the "time differential with
Greenwich Mean Time (GMT)" setting. Depending on
your computer or operating system, the creation date
and time of the WAV file may not be displayed correct-
ly.
5. Option..............................................................
Specifies how the WAV file will be exported to CD-R/
RW.
5b
5a. CD WritingSpeed ...........[1x, 2x, 4x, 6x, 8x]
If exporting to CD-R/RW, you can specify the writing
speed. ( p.94)
Only the writing speeds supported by the drive and
media you are using will be displayed.
5b. Finalize..........................................[On, Off]
You may export additional WAV files to a CD-R/RW
that already contains data, but if this is the last addition
you want to make to this disc, you can turn this field
On. Some drives such as early CD-ROM drives cannot
read a disc unless it has been finalized.
If the CD-R/RW disc has no more space for addi-
tional data to be written, it will be finalized automat-
ically.
6. Exec.(Execute) ...................................................
Executes the WAV file export operation.
6a. Export Size ............................. [16bit, 24bit]
Selectable only if the clipboard contains 24-bit data
You can select whether the 24-bit data that was copied to
the clipboard will be exported as a 16-bit WAV file or as
a 24-bit WAV file.
6b. Dither SW .................................... [On, Off]
Selectable only when exporting 24-bit ➞ 16-bit
If 24-bit data from the clipboard is being exported as a
16-bit WAV file, you can specify whether dithering will
be performed.
make quantization noise less noticeable.
5a
On: Dithering will be performed on the data to
Off: Dithering will not be performed.
Reference
6a
6b
115