Prgplay: Program Playback Of Songs; In/Loc1, Out/Loc2, To/Loc3, End/Loc4 - Korg D1200 Owner's Manual

PrgPlay: Program playback of songs

By arranging songs in the program play list, you can auto-
matically play them in any order.
For details on the settings and procedure, refer to p.56.
2
1. Select TimeDisp Type ........ [Abs-Song, Abs-Total]
Selects the counter display type.
Abs–Song: Display the elapsed time for one song.
Abs–Total: Display the elapsed time for the entire pro-
gram.
To confirm the setting you have selected, press the
[YES/OK] key. To cancel your selection, press the [NO/
CANCEL] key.
2. ProgramPlay List .................................. [01...99]
Arrange songs in this list to specify the playback order.
The songs will play back in the listed order from top to
bottom.
Each line of the list indicates (from the left) the playback
order, song number, and song name.
If a song in the list cannot be found, it will be skipped
and the next song in the play list will be played.
118
IN/LOC1, OUT/LOC2, TO/
LOC3, END/LOC4
Locations within a song that you register to the [IN/LOC1],
[OUT/LOC2], [TO/LOC3], and [END/LOC4] keys are used
by the following functions.
• Locate point (move to the registered time when you
1
press a key)
• Loop playback in/out point
• Auto-punch recording in/out points
• Track editing points
• In-out playback
When you hold down the [IN/LOC1] key and press the
[OUT/LOC2] key, this function plays from the IN time
(registered in the [IN/LOC1] key) to the OUT time (reg-
istered to the [OUT/LOC2] key). This is useful when
you want to play back the IN–OUT region of the song to
verify the contents of the region.
Locate functions
IN/LOC1
The time location that you register for the [IN/LOC1]
key is used for the following purposes.
• Locate point 1
• Punch-in time for auto-punch recording
• Playback start time for loop playback
• Playback start time for in-out playback
• The following times for track editing operations
Starting time of the copy-source for "Copy Track"
Starting time of the inserted silence for "Insert Track"
Starting time of the erased region for "Erase Track"
Starting time of the deleted region for "Delete Track"
Starting time of the swap-source and swap-destina-
tion for "Swap Track"
Starting time of the data to be reversed for "Reverse
Track"
Starting time of the data to be expanded/compressed
for "Exp/Comp Track"
Starting time for "Optimize Track"
Starting time for "Fade Track"
Starting time for "Normalize Track"
OUT/LOC2
The time location that you register for the [OUT/LOC2]
key is used for the following purposes.
• Locate point 2
• Punch-out time for auto-punch recording
• Playback end time for loop playback
• Playback end time for in-out playback
• The following times for track editing operations
Ending time of the copy-source for "Copy Track"
Ending time of the inserted silence for "Insert Track"
Ending time of the erased region for "Erase Track"
Ending time of the deleted region for "Delete Track"
Ending time of the swap-source and swap-destina-
tion for "Swap Track"
Ending time of the data to be reversed for "Reverse
Track"
Ending time of the data to be expanded/compressed
for "Exp/Comp Track"
Ending time for "Optimize Track"
Ending time for "Fade Track"
Ending time for "Normalize Track"