Using The Counter Display - Korg D1200 Owner's Manual

To select a song in a non-adjacent location
1 Press the [SONG] key to access the "SelSong" tab page.
2
2 Move the cursor to "SongNumber," and turn the
[VALUE] dial to select a song number.
To select a song from the song list
1 Press the [SONG] key to access the "SelSong" tab page.
2
2 Select the " " button located at the left of the song
number, and press the [ENTER] key.
The song list will appear.
3 Turn the [VALUE] dial or use the
select a song, press the [ENTER] key, and then press the
[YES/OK] key.

2. Using the counter display

The counter indicates the current location within the selected
song. You can use the counter to program in and out points,
to "mark" locations, and to pinpoint an exact location when
using the "scrub" function.
2-1. Switching the counter display
You can select the type of units that the counter will use to
display the current location.
1 Select the " " button at the left of the counter, and press
the [ENTER] key to access the "Select Time Disp Type"
dialog box.
32
/ buttons to
1
2 Select a location display method and press the [YES/
OK] key.
You can choose from the following four methods.
• . . "measures", "beats", "1/96th beats"
• : . "minutes", "seconds", "1/1000th sec-
onds"
• : . F "minutes", "seconds", "1/30 seconds"
• . Free "minutes" ."seconds" (remaining amount
of recording time)
To check the remaining recording time
Access the "Select Time Disp Type" dialog box, and
choose " . Free."
To determine the correct " .
STATUS] to REC for all the tracks that you want to
record. The display will indicate the recording time that
is available for recording on each track that is set to
REC.
2-2. Changing the current location
Using the counter to move to a new location
1 Select a page in which the upper part of the display
shows the counter, such as the [SONG] "SelSong" tab
page.
2 In the counter, select the time field (e.g., measures, min-
utes, seconds) that you want to change.
3 Turn the [VALUE] dial to move the current location.
Using [FF] and [REW] to move to a new location
Moving backward
Press the [REW] key to move backward in the song. You
will move continuously if you keep holding [REW]
down.
You may also use this method to move during playback.
Moving forward
Press the [FF] key to move forward in the song. You will
move continuously if you keep holding [FF] down.
You may also use this method to move during playback.
Moving to the beginning of the song
If you are currently not at the begining of the song, hold
down the [STOP] key and press the [REW] key to move
to the beginning of the song.
Moving to the end of the song
If you are currently not at the end of the song, hold
down the [STOP] key and press the [FF] key to move to
the end of the song.
Free" time, set [TRACK