Auto Punch; Atpunch: Settings For Auto Punch-In/Out Recording - Korg D1200 Owner's Manual

AUTO PUNCH

AtPunch: Settings for auto punch-in/
out recording
Auto punch-in/out recording is a function that automatical-
ly starts recording (punch-in) and stops recording (punch-
out) at the locations you specify ahead of time.
If "AutoPunch" is "On" when you record, punch-in/out re-
cording will be performed.
1
2
1. AutoPunch ...........................................[On, Off]
Switches the auto punch-in/out recording function on/
off.
used when you record. If this is "On," the [AUTO
PUNCH] key will light.
When you begin recording, playback will begin prior to
the IN time by the length of the specified pre-roll time.
Actual recording will occur in the IN-OUT region, and
playback will then stop following the specified post-roll
time. ( "RolTime")
2. In .............................................. (000:00.000...)
Displays the auto punch-in time (the location at which
recording will begin).
This location can be specified by using the [STORE] key
and the [IN/LOC1] key, or specified in the "Wave" dis-
play.
3. Out ........................................... (000:00.000...)
Displays the auto punch-out time (the location at which
recording will end).
This location can be specified by using the [STORE] key
and the [OUT/LOC2] key, or specified in the "Wave"
display.
4. RolTime ............................................................
Specifies the pre-roll and post-roll times used for auto
punch-in/out.
4a
4c
4a. PreRoll........................................... [00...10]
Specifies the duration of playback that will precede
punch-in (IN).
4b. PostRoll ......................................... [00...10]
Specifies the duration of playback that will follow
punch-out (OUT).
122
3
On: Auto punch recording will be
Off: Recording will occur normally.
4b
4c. Unit........................[Second, Meas(Measure)]
Selects the unit for setting the pre-roll and post-roll
times.
You can choose "Second" or "Meas" (measure).
Press the [YES/OK] key to apply the specified pre-roll
and post-roll times, or press the [NO/CANCEL] key to
cancel any changes.
PreRoll IN(LOC 1)
Playback
Start recording
Auto punch-in/out recording
LOOP recording (repeat this region)
5. Wave ...............................................................
Here you can view the audio waveform and set IN and
4
OUT locations more precisely.
5
you can also use the Play From/Play To and Slow Play
functions. ( p.124)
5a
5c
5d
5a. In ........................................ [000:00.000...]
5b. Out...................................... [000:00.000...]
Specifies the IN and OUT points.
When you place the cursor at "In" or "Out," the track
chosen in "TrackSelect" will automatically be soloed
and the Scrub function will be turned on, so that you
will hear only that track when you turn the [VALUE]
dial.
5c. TrackSelect ............................... [Track1...12]
Selects the track whose waveform will be displayed and
which will be played. Press the " " button and choose
from the list.
5d. Zoom In/Out/Up/Down..............................
Adjusts the size of the waveform display and the play-
back speed.
: Expands the waveform display vertically.
: Shrinks the waveform display vertically.
: Expands the waveform display horizontally.
: Shrinks the waveform display horizontally.
When you press the [YES/OK] key, the time locations
specified for "In" and "Out" will be overwritten onto
the [IN/LOC1] and [OUT/LOC2] keys. If you press the
[NO/CANCEL] key, your settings will be cancelled.
OUT(LOC 2) PostRoll
Recording Playback
Stop recording
5b