17 SERVICE WORK ON THE ENGINE
17.4
120
401955-12
Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
401955-10
–
8
Remove filler plug
with the O-ring, and fill up with engine
oil.
Engine oil
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and check it for leaks.
Finishing work
–
Install the engine guard. (
–
Check the engine oil level. (
–
1
Remove filler plug
with the O-ring.
–
Add the same engine oil used when the last oil change was
carried out.
Engine oil (SAE 10W/50) (
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
KTM recommends changing the engine oil where neces-
sary.
–
Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
1.20 l
Engine oil
(1.27 qt.)
(SAE 10W/50)
(
p. 138)
p. 50)
p. 117)
p. 138)