Foot Brake Lever; Plug-In Stand; Factory Start - KTM 450 SX-F FACTORY EDITION Owner's Manual

6.14

Foot brake lever

6.15

Plug-in stand

6.16

Factory Start

Foot brake lever
The foot brake lever is used to activate the rear brake.
401956-10
The support for plug-in stand
dle.
The plug-in stand is used to park the motorcycle.
The plug-in stand is used as a fork locker when transporting the
motorcycle.
Info
Remove the plug-in stand before riding.
The tool can be attached to the plug-in stand holders.
H02629-10
The Factory Start
Possible states
•
A Factory Start is deactivated – The fork is in the normal
operating mode.
• Factory Start is activated – The fork is compressed and
B
the front of the motorcycle is lowered.
Activating the Factory Start lowers the front of the motorcycle,
which then causes the front wheel to lift off the ground when
accelerating.
When the fork compresses for the first time, the Factory Start lock
button is released automatically. From this point on, the fork oper-
ates as if the Factory Start were deactivated or not installed.
H04998-10
1
is located in front of the right footrest.
1
is the left side of the wheel spin-
1
is mounted on the right fork protector.
CONTROLS 6
19