19.2
Preparing for use after storage
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since
the engine cannot warm up properly, the water vapor
produced during combustion condenses and causes
valves and the exhaust system to rust.
–
Install the 12-V battery.
–
Remove the motorcycle from the lift stand. (
–
Perform checks and maintenance measures when preparing for
use. (
p. 25)
–
Make a test ride.
401059-01
(
p. 100)
p. 47)
STORAGE 19
125