Changing The Mapping; Adjusting The Idle Speed - KTM 450 SX-F FACTORY EDITION Owner's Manual

16.4

Changing the mapping

Info
The desired engine characteristic can be activated using the combination switch.
The setting most recently selected is activated again when restarting.
Traction control can also be activated in each mapping.
The mapping can also be changed during the ride.
16.5

Adjusting the idle speed

Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized KTM workshop will be glad to help.)
Activating STANDARD mapping:
–
Press button
Guideline
Engine speed
The indicator lamp
STANDARD – balanced response
Info
F03762-10
Traction control can be activated additionally using
the TC button
Activating ADVANCED mapping:
–
Press button
Guideline
Engine speed
The indicator lamp
ADVANCED – direct response
Info
F03763-10
Traction control can be activated additionally using
the TC button
TUNING THE ENGINE 16
1
.
< 4,000 rpm
A
lights up.
3
.
2
.
< 4,000 rpm
B
lights up.
3
.
113