Restoring The Original Chartplotter Factory Settings; Sharing And Managing User Data; Selecting A File Type For Third-Party Waypoints And Routes; Copying User Data From A Memory Card - Garmin Volvo Penta GLASS COCKPIT 8x10 Owner's Manual

• System Units
• Calibrate Water Speed
• Radar Antenna Size
Chart Settings:
• Chart Borders
• Hazard Colors
• Heading Line
• Land POIs
• Light Sectors
• Navaid Size
• Navaid Type
• Photo Points
• Preferred Depth
• Shallow Shading
• Service Points
• Vessel Icon (Cannot be synced between all models)
Restoring the Original Chartplotter Factory
Settings
NOTE: This affects all devices on the network.
1 Select Options > Settings > System > System
Information > Reset.
2 Select an option:
• To reset the device settings to the factory default
values, select Reset Default Settings. This restores
the default configuration settings, but does not
remove saved user data, maps, or software
updates.
• To reset all settings in all devices in the station
to the factory default values, select Reset Station
Settings. This restores the default configuration
settings, but does not remove saved user data,
maps, or software updates
• To clear saved data, such as waypoints and routes,
select Delete User Data. This does not affect maps
or software updates.
• To clear saved data and reset device settings to the
factory default values, disconnect the chartplotter
from the Garmin Marine Network, and select Delete
Data and Reset Settings. This does not affect
maps or software updates.

Sharing and Managing User Data

This feature allows you to import data from other
devices that may have been generated by third parties.
Garmin makes no representations about the accuracy,
completeness, or timeliness of data that is generated by
third parties. Any reliance on or use of such data is at your
own risk.
88
WARNING
You can share user data between compatible devices.
User data includes waypoints, saved tracks, routes, and
boundaries.
• You can share data across the Garmin Marine Network.
• You can share and manage user data using a memory
card. You must have a memory card installed in the
device. This device supports up to a 32 GB memory
card, formatted to FAT32.
Selecting a File Type for Third-Party
Waypoints and Routes
You can import and export waypoints and routes from
third-party devices.
1 Insert a memory card into the card slot.
2 Select Info > User Data > Data Transfer > File Type.
3 Select GPX.
To transfer data with Garmin devices again, select the
ADM file type.

Copying User Data from a Memory Card

You can transfer user data from a memory card to transfer
from other devices. User data includes waypoints, routes,
Auto Guidance paths, tracks, and boundaries.
NOTE: Only boundary files with an .adm extension are
supported.
1 Insert a memory card into a card slot.
2 Select Info > User Data > Data Transfer.
3 If necessary, select the memory card to copy data to.
4 Select an option:
• To transfer data from the memory card to the
chartplotter and combine it with existing user data,
select Merge from Card.
• To transfer data from the memory card to the
chartplotter and overwrite existing user data, select
Replace from Card.
5 Select the file name.

Copying User Data to a Memory Card

You can save user data to a memory card to transfer to
other devices. User data includes waypoints, routes, Auto
Guidance paths, tracks, and boundaries.
1 Insert a memory card into the card slot.
2 Select Info > User Data > Data Transfer > Save to
Card.
3 If necessary, select the memory card to copy the data
to.
4 Select an option:
• To create a new file, select Add New File, and enter
a name.
• To add the information to an existing file, select the
file from the list, and select Save to Card.
Sharing and Managing User Data