Enabling Voice Control; Supported Headsets; Pairing A Wireless Headset With A Garmin Chartplotter; Using A Wireless Headset With A Garmin Chartplotter - Garmin Volvo Penta GLASS COCKPIT 8x10 Owner's Manual

Enabling Voice Control

Before you can enable voice control on your device,
you must install a Garmin Voice Control USB module
(010-13194-00).
1 From the home screen, select Options > Settings >
System > Sounds and Display > Voice Control.
2 Select Voice Control > Voice Language.
3 Select the voice control language.
NOTE: The voice control language can be different
than the text language.

Supported Headsets

The Voice Control USB module supports headsets and
speakers with the following specifications:
• Bluetooth ® hands-free profile version 1.6 or higher
• mSBC audio codec (16 kHZ)
NOTE: Headset manufacturers often list these as "HD
Voice" or "Wideband Speech" headsets.
A list of supported headsets is available at
.com/marine.

Pairing a Wireless Headset with a Garmin Chartplotter

1 On the chartplotter, select Options > Settings >
Communications > Wireless Devices > Headsets.
2 Select Search for Devices.
3 Enable pairing mode on your headset according to the
manufacturer's instructions.
The name of your headset appears on the chartplotter
after it is detected.
4 Select the name of your headset.
5 Select Connect.
NOTE: Only one headset can be paired at a time.
Your headset appears on the chartplotter as Paired
and Connected.

Using a Wireless Headset with a Garmin Chartplotter

Before using a wireless headset for voice control, make
sure the volume on your headset is sufficient to hear voice
responses.
1 Say OK Garmin.
2 Say a command

(Chartplotter Voice Commands,

page 8).
The chartplotter completes the action or provides a
voice response.
Chartplotter Voice Commands
The voice command system is designed to detect natural
speech. This is a list of commonly used voice commands,
but the device does not require these exact phrases (other
than OK Garmin). You can try saying variations of these
commands in a way that is natural to you. An expanded
list of voice commands is available at
/marine_voice_commands.
8
Voice Command
OK Garmin
Show Navigation Chart
Show Fishing Chart
Show Radar
Show Sonar
What's the Depth
What's the Fuel Level
What's the Engine
Temperature
support.garmin
What's the System Unit
Voltage
What's the Distance to
the Next Waypoint
Tell me the Tide Info
Show Media Player
Play Music
Pause Music
Resume
Previous Track
Next Track
Mute
Unmute
Lower Volume
Raise Volume
Show Traditional
Sonar
Show Clear View
garmin.com/support
Show Side View
Show Live Scope
Lock Screen
Function
Prepares chartplotter for voice
commands
Opens the navigation chart
screen
Opens the fishing chart screen
Opens the radar screen
Opens the sonar screen
Replies with depth at current
location
Replies with current fuel level
Replies with current engine
temperature
Replies with current system unit
voltage
Replies with distance to next set
waypoint
Replies with current tide infor-
mation
Opens the media player
Plays the currently selected
media
Pauses the currently selected
media
Resumes the currently selected
media
Returns to the previous track
Skips to the next track
Mutes media
Unmutes media
Lowers media volume
Raises media volume
Opens the traditional sonar
screen
Opens the Garmin ClearVü
sonar screen
Opens the Garmin SideVü
sonar screen
Opens the LiveScope screen
™
Locks the chartplotter
Controlling the Chartplotter
™
™