Inserting Memory Cards (8X10/8X12/8X16); Inserting A Memory Card (8X17/8X22/8X24/87Xx); Acquiring Gps Satellite Signals; Selecting The Gps Source - Garmin Volvo Penta GLASS COCKPIT 8x10 Owner's Manual

memory cards to record Garmin Quickdraw
mapping, record sonar (with a compatible transducer),
transfer data such as waypoints and routes to another
compatible chartplotter or a computer, and use the
ActiveCaptain ® app.
This device supports up to a 32 GB memory card,
formatted to FAT32 with speed class 4 or higher. Use
of an 8 GB or larger memory card with speed class 10
is recommended. An 8 GB memory card is included with
8x10/8x12/8x16 models.
Model Memory Card Location
8x10 Back of the device
8x12 Back of the device
8x16 Back of the device
8x17 External card reader
8x22 External card reader
8x24 External card reader
87xx External card reader

Inserting Memory Cards (8x10/8x12/8x16)

This device supports up to a 32 GB microSD memory
card, formatted to FAT32 with speed class 4 or higher.
Use of an 8 GB or larger memory card with speed class
10 is recommended. An 8 GB memory card is included
with 8x10/8x12/8x16 models.
1 Open the weather cap
chartplotter.
2 Insert the memory card
3 Press the card in until it clicks.
4 Press the weather cap firmly shut to prevent corrosion.

Inserting a Memory Card (8x17/8x22/8x24/87xx)

NOTE: The memory card reader is not included with the
chartplotter. It is sold as a separate accessory. You must
connect a memory card reader or a chartplotter model
with a built-in memory card slot to the Garmin Marine
Network.
This device supports up to a 32 GB SD memory card,
formatted to FAT32 with speed class 4 or higher. Use of
an 8 GB or larger memory card with speed class 10 is

Customizing the Chartplotter

Contours
™
Memory Card Type
microSD ®
microSD
microSD
SD ®
SD
SD
SD
on the back of the
.
recommended. An 8 GB memory card is included with
8x10/8x12/8x16 models.
1 Open the door on the memory card reader.
2 Insert the memory card
from the door.
3 Press the card in until it clicks.
4 Close the card reader door.

Acquiring GPS Satellite Signals

The device may need a clear view of the sky to acquire
satellite signals. The time and date are set automatically
based on the GPS position.
1 Turn on the device.
2 Wait while the device locates satellites.
It may take 30 to 60 seconds to acquire satellite
signals.
To view the GPS satellite signal strength, select Options
> Settings > System > GPS.
If the device loses satellite signals, a flashing question
mark appears over on the chart.
For more information about GPS, go to
/aboutGPS. For help acquiring satellite signals, see
device will not acquire GPS signals, page

Selecting the GPS Source

You can select your preferred source for GPS data, if you
have more than one GPS source.
1 Select Options > Settings > System > GPS >
Source.
2 Select the source for GPS data.
Customizing the Chartplotter

Home Screen

The home screen is an overlay that provides access to
all of the features in the chartplotter. The features are
dependent on the accessories you have connected to
the chartplotter. You may not have all of the options and
features discussed in this manual.
When viewing any screen, you can return to the home
screen by selecting .
with the label facing away
garmin.com
My
92.
3