Livescope Sonar View; Perspective View; Selecting The Transducer Type; Selecting A Sonar Source - Garmin Volvo Penta GLASS COCKPIT 8x10 Owner's Manual

LiveScope Sonar View

This sonar view shows a live view of what is in front
of or below the boat and can be used to see fish and
structures.
Depth information
Suspended targets or fish
Bottom of the body of water

Perspective View

This sonar view shows a live view of what is around and
ahead of your boat and can be used to see shorelines,
fish, and structures. This view is best used in shallow
water of 50 feet (15 meters) or less.
To see this sonar view, you must install a compatible
LiveScope transducer on compatible a perspective mode
mount.

Selecting the Transducer Type

This chartplotter is compatible with a range of accessory
transducers, including the Garmin ClearVü transducers,
which are available at garmin.com/transducers.
If you are connecting a transducer that was not included
with the chartplotter, you may need to set the transducer
type to make the sonar function properly.
40
NOTE: Not all chartplotters and sonar modules support
this feature.
1 Complete an action:
• From a sonar view, select Options > Sonar Setup
> Installation > Transducers.
• Select Options > Settings > My Vessel >
Transducers.
2 Select an option:
• To enable the chartplotter to detect the transducer
automatically, select the transducer to change, and
select Auto Detect.
• To select the transducer manually, select the
transducer to change, select the transducer model
from the list, and select Change Model.
Manually selecting a transducer could result in
damage to the transducer or reduced transducer
performance.
NOTE: If you select the transducer manually,
disconnect that transducer, and then connect a
different transducer, you should reset this option to
Auto Detect.

Selecting a Sonar Source

This feature may not be available with all models.
When you are using more than one sonar data source for
a particular sonar view, you can select the source to use
for that sonar view. For example, if you have two sources
for Garmin ClearVü, you can select the source to use from
the Garmin ClearVü sonar view.
1 Open the sonar view for which you will change the
source.
2 Select Options > Sonar Setup > Source.
3 Select the source for this sonar view.

Renaming a Sonar Source

You can rename a sonar source to easily identify that
source. For example, you use "Bow" as the name of the
transducer on the bow of your boat.
To rename a source, you must be in the applicable sonar
view for the source. For example, to rename the Garmin
ClearVü sonar source, you must open the Garmin ClearVü
sonar view.
1 From the sonar view, select Options > Sonar Setup >
Source > Rename Sources.
2 Enter the name.

Creating a Waypoint on the Sonar Screen

1 From a sonar view, drag the screen or select
2 Select a location.
3 Select .
4 If necessary, edit the waypoint information.
NOTICE
.
Sonar Fishfinder