Associating The Camera To A Video Source; Video Camera Movement Control; Configuring The Video Appearance; Garmin Virb Action Cameras - Garmin Volvo Penta GLASS COCKPIT 8x10 Owner's Manual

Dynamic Range: Sets the range to wide or standard.
E. Stabilization: Stabilizes the picture using software
image processing.
Light: Controls the camera's integrated light source to
help illuminate the environment.
Name: Allows you to enter a new name for this camera.
FLIR™ Menu: Provides access to the settings for the
camera.

Associating the Camera to a Video Source

You may need to associate the camera with a video
source.
1 From the video screen, select Options > Source.
2 Select the camera.
3 Select Video Setup > Set Input.
4 Select the video input.

Video Camera Movement Control

Do not aim the camera at the sun or extremely bright
objects. Damage to the lens may occur.
Always use the chartplotter controls or buttons to pan and
tilt the camera. Do not manually move the camera unit.
Manually moving the camera may damage the camera.
NOTE: This feature is available only when a compatible
camera is connected. You may need to update the
camera software to use this feature.
You can control the movements of the connected video
cameras that support panning, tilting, and zooming.
Controlling Video Cameras Using On-Screen Controls
On-screen controls allow you to control pan-tilt-zoom
(PTZ) cameras. Refer to the camera manual for a list of
available features.
1 From a video screen, touch the screen.
The video controls appear on the screen.
2 Select an option:
• To zoom in and out, use the zoom button.
• To pan or tilt the camera, use the compass rose.
TIP: Hold within the compass rose to continue to
move the camera in the desired direction.
Controlling a Video Camera Using Gestures
When a networked video camera supports gesture
responses, you can control pan-tilt-zoom cameras using
gestures directly on the chartplotter screen. Check your
camera user manual for a list of available features.
TIP: Using gestures allows video control without
displaying the video controls.
1 From a video screen, touch the screen.
2 Select an option:
• To zoom in and out with the camera, use pinch and
zoom gestures.
• To pan or tilt the camera, swipe the screen in the
desired direction.
Viewing Video
NOTICE

Configuring the Video Appearance

NOTE: Not all options are available on all camera models
and chartplotter models.
1 From the video screen, select Options > Video Setup.
2 Select an option:
• To show the video using a stretched aspect ratio,
select Aspect > Stretch. The video cannot be
stretched beyond the dimensions provided by the
connected video device, and it may not fill the entire
screen.
• To show the video using a standard aspect ratio,
select Aspect > Standard.
• To adjust the brightness, select Brightness, and
select Up, Down, or Auto.
• To adjust the color saturation, select Saturation,
and select Up, Down, or Auto.
• To adjust the contrast, select Contrast, and select
Up, Down, or Auto.
• To allow the chartplotter to automatically select the
source format, select Standard > Auto.
Garmin VIRB Action Cameras
®
Do not view video or photos while operating the vessel.
Failure to pay attention to the conditions on the water can
result in vessel damage, personal injury, or death.
Most VIRB action cameras connect to the chartplotter
from the camera menu (Connecting a VIRB Action
Camera, page 78).
The VIRB 360 camera connects using WPS
VIRB 360 Action Camera, page
In this manual, the term "VIRB action camera" refers to all
models, except in the instructions on how to connect. In
that case, as listed above, the term "VIRB 360 camera"
refers to only the 360 model.

Connecting a VIRB 360 Action Camera

You can connect a VIRB 360 action camera to the
chartplotter using WPS. If you are connecting a VIRB
camera, connect through the camera settings
a VIRB Action Camera, page
1 Set up the chartplotter's Wi‑Fi network
‑ Fi Network, page
Wi 12).
2 Bring the camera near the chartplotter.
3 On the VIRB 360 camera main menu, select Wireless
> Wi-Fi.
4 If necessary, select the Wi-Fi toggle switch to enable
the Wi‑Fi technology.
5 Press to select WPS, and press OK.
6 On the chartplotter, select Vessel > VIRB® >
The camera searches for the Wi‑Fi network and
connects.
You can control the camera using the chartplotter.
WARNING
(Connecting a
77).
(Connecting
78).
(Setting Up the
.
77