Deleting A Waypoint Or An Mob; Deleting All Waypoints; Routes; Creating And Navigating A Route From Your Present Location - Garmin Volvo Penta GLASS COCKPIT 8x10 Owner's Manual

5 Review the course indicated by the magenta line.
NOTE: When using Auto Guidance, a gray segment
within any part of the magenta line indicates that Auto
Guidance cannot calculate part of the Auto Guidance
line. This is due to the settings for minimum safe water
depth and minimum safe obstacle height.
6 Follow the magenta line, steering to avoid land,
shallow water, and other obstacles.

Deleting a Waypoint or an MOB

1 Select Info > User Data > Waypoints.
2 Select a waypoint or an MOB.
3 Select Review > Delete.

Deleting All Waypoints

Select Info > User Data > Delete User Data >
Waypoints > All.

Routes

A route is a path from one location to one or more
destinations.
Creating and Navigating a Route From Your Present
Location
You can create and immediately navigate a route on the
Navigation chart or the Fishing chart. This method does
not save the route.
1 From the Navigation chart or Fishing chart, select a
destination.
2 Select Navigate To > Route To.
3 Select the location of the last turn before the
destination.
4 Select Add Turn.
5 If necessary, repeat to add turns, working backward
from the destination to the present location of your
vessel.
The last turn you add should be the first turn you make,
starting from your present location. It should be the
turn closest to your vessel.
6 Select Done.
7 Review the course indicated by the magenta line.
8 Follow the magenta line, steering to avoid land,
shallow water, and other obstacles.

Creating and Saving a Route

You can add up to 250 turns to one route.
1 Select Info > User Data > Routes > New > Route
Using Chart.
2 Select the starting location of the route.
The starting point can be your present location or
another location.
3 Select Add Turn.
4 Select the location of the next turn on the chart.
5 Select Add Turn.
6 If necessary, repeat steps 4 and 5 to add more turns.
7 Select Done.
28

Viewing a List of Routes and Auto Guidance Paths

1 Select Info > User Data > Routes.
2 If necessary, select Filter to see routes only or Auto
Guidance paths only.
3 Select Sort to sort the list of available routes by range,
length, or name.

Editing a Saved Route

You can change the name of a route or change the turns
the route contains.
1 Select Info > User Data > Routes.
2 Select a route.
3 Select Review > Edit Route.
4 Select an option:
• To change the name, select Name, and enter the
name.
• To edit a turn from a list, select Edit Turns > Use
Turn List, and select a turn from the list.
• To select a turn using the chart, select Edit Turns >
Use Chart, and select a location on the chart.
Modifying a turn that uses a saved waypoint does not
move that waypoint, it relocates the turn in the route.
Moving the location of a waypoint used in a route does
not move the turn in the route.

Finding and Navigating a Saved Route

Before you can browse a list of routes and navigate to
one of them, you must create and save at least one route
(Creating and Saving a Route, page
1 Select Info > User Data > Routes.
2 Select a route.
3 Select Navigate To.
4 Select an option:
• To navigate the route from the starting point used
when the route was created, select Forward.
• To navigate the route from the destination point
used when the route was created, select Backward.
• To navigate parallel to the route, select Offset
(Browsing for and Navigating Parallel to a Saved
Route, page 29).
• To navigate a route from the route's first waypoint,
select From Start.
A magenta line appears. In the center of the magenta
line is a thinner purple line that represents the
corrected course from your present location to the
destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
5 Review the course indicated by the magenta line.
6 Follow the magenta line along each leg in the route,
steering to avoid land, shallow water, and other
obstacles.
7 If you are off course, follow the purple line (corrected
course) to go to your destination, or steer back to the
magenta line (direct course).
28).
Navigation with a Chartplotter