Table of Contents
Advertisement
NL Troubleshooting
Malfunction
Rust traces on the cutlery.
There is detergent
residue in the detergent
dispenser or in the tablet
dispenser.
Abnormal foaming
present.
Display instructions
Malfunction
Refill softening salt
indicator lights up.
Refill softening salt indicator
does not light up.
Rinse aid refill
indicator lights up.
48
Cause
Cutlery also rusts
when washed with
rusty items.
Salinity in the wash water
is too high.
The spray arms were
blocked by crockery,
preventing the
detergent from being
rinsed away.
Dishwasher detergent dispenser laundry
damp when filling the
detergent.
There is hand
dishwashing liquid in the
rinse aid reservoir.
Rinse aid has been
spilled.
Used dishwasher detergent
or cleaning product produces
too much foam.
Cause
There is no softening
salt.
Sensor does not recognize
softening salt tablets.
Water softening is
switched off.
Rinse aid is missing.
Troubleshooting
Do not wash rusting objects.
▶
Remove spilled softening salt from
1.
the rinse aid container.
Tightly close the lid of the
2.
softening salt reservoir.
▶
Make sure that the spray arms are
not blocked and can rotate freely.
Only put the detergent in a
▶
dry detergent dispenser.
▶
Fill rinse aid directly into the
reservoir.
→ "Filling rinse aid",
Page 25
Remove the rinse aid with a
▶
cloth.
▶ Use a different brand of
detergent.
Troubleshooting
Fill in "softening salt" → Page 23
▶
Bee.
Do not use softening salt
▶
tablets.
Set water softening
▶
Fill the "rinse agent"
1.
→
Page 25 Bee.
Set the amount of rinse aid.
2.
→ "Setting the rinse aid
amount", Page 26
Advertisement
Table of Contents
