Table of Contents
Advertisement
Drinking water connection
Connect the device to a drinking
water connection.
Install drinking water connection
Remark
sex When you replace the device,
you can use a new water supply
hose.
The necessary steps can be found in
1.
the supplied installation instructions.
Connect the device to the drinking
2.
water connection using the
enclosed parts.
The "technical data"
→ Page 55 consider.
Make sure that the drinking water
3.
connection is not kinked, crushed
or entangled.
Electrical connection
Connect the device to the mains.
Connecting the appliance electrically
Comments
sex Observe the "Safety
sing" → Page 4 .
sex Only connect the device
on an AC voltage of 220 - 240 V
and 50 Hz or 60 Hz.
sex Please note that the wa-
The protection system only works
when the device is supplied with
power.
Connect the appliance plug of the
1.
connecting cable to the appliance.
Plug the appliance into a mains
2.
socket in the vicinity of the
appliance.
The connection data of the device
can be found on the type plate.
Set up and connect NL
Check the plug for tightness.
3.
13
Advertisement
Table of Contents
