Table of Contents
Advertisement
Display instructions
Malfunction
Refill softening salt
indicator lights up.
Refill softening salt indicator
does not light up.
Rinse aid refill
indicator lights up.
Rinse aid refill indicator
does not light up.
Malfunctions
Malfunction
Water remains in the
appliance at the end of the
programme.
Device cannot be
switched on or operated.
The device does not start.
Cause
There is no softening
salt.
Sensor does not recognize
softening salt tablets.
Water softening is
switched off.
Rinse aid is missing.
Water softening is
switched off.
Cause
Sieve system or space under
the sieve is clogged.
Program has not yet
ended.
Software update in
progress.
Device functions
have failed.
Fuse of the house
installation is not OK.
Power cord is not
connected.
TroubleshootingNL
To fix an issue
▶ Fill softening salt→Page 27
Bee.
Do not use softening salt
▶
tablets.
Set water softening
▶
Fill the rinse aid
1.
→
Page 29Bee.
Set the amount of rinse aid.
2.
"Setting the rinse aid
amount", Page 29
Set the amount of rinse
▶
aid.
To fix an issue
Clean the strainers→ Page 45.
1.
Clean the drain pump
2.
→
Page 60.
▶
Wait for the end of the program or
cancel the program withReset off.
"Cancel program",
▶
page 36
▶
Wait for the software update to
complete.
Unplug the appliance from
1.
the mains or switch off the
fuse.
Wait at least 2 minutes.
2.
Connect the device to the
3.
mains.
Turn on the device.
4.
▶
Check the fuse of the house
installation.
Check if the socket is
1.
working.
57
Advertisement
Table of Contents
