Table of Contents
Advertisement
Malfunction
Rinse aid refill indicator
does not light up.
Display flashes.
Malfunctions
Malfunction
Water remains in the
appliance at the end of the
programme.
Device cannot be
switched on or operated.
The device does not start.
Program starts
automatically.
Cause
Water softening is
switched off.
Appliance door is not
completely closed.
Cause
Sieve system or space under
the sieve is clogged.
Program has not yet
ended.
Device functions
have failed.
Fuse of the house
installation is not OK.
Power cord is not
connected.
Appliance door is not
completely closed.
The program has not
ended.
Troubleshooting NL
Troubleshooting
Set the amount of rinse
▶
aid.
▶
Close the appliance door.
sex
Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
Troubleshooting
Clean the "seven" → Page 37.
1.
Clean the "drain pump"
2.
→
Page 52.
▶
Wait for the end of the program or
cancel the program with Reset off.
→ "Cancel program",
▶
page 33
Unplug the appliance from
1.
the mains or switch off the
fuse.
Wait at least 2 minutes.
2.
Connect the device to the
3.
mains.
Turn on the device.
4.
▶
Check the fuse of the house
installation.
Check if the socket is
1.
working.
Check whether the connecting cable is
2.
properly connected to the mains
socket and to the rear of the
appliance.
▶
Close the appliance door.
→ "Cancel program",
▶
page 33
49
Advertisement
Table of Contents
