Display instructions
Malfunction
Indication of softening salt with- No softening-
fill is lit.
Indication of softening salt with- Water softening is off
filling does not light up.
Rinse aid refill
indicator lights up.
Rinse aid refill
indicator is not lit.
Display flashes.
Malfunctions
Malfunction
Water remains in the
appliance at the end of
the program.
Device cannot be turned on- Software update is being performed
switched or operated.
Cause
salt.
Sensor recognizes softening
salt tablets do not.
switched.
Rinse aid is missing.
Water softening is
switched off.
Appliance door is not complete
Closed.
Cause
Sieve system or space below
the sieve is clogged.
Program has not yet
ended.
fed.
Device functions
have failed.
Troubleshooting NL
Troubleshooting
Fill in "softening salt" → Page 24
▶
Bee.
Do not use softening salt
▶
bleed.
Set water softening
▶
Fill the "rinse agent"
1.
→
Page 26 Bee.
Set the amount of rinse aid.
2.
→ "Amount of rinse aid
set", page 27
Amount of rinse aid in
▶
set.
Close the appliance door.
▶
s
Arrange the crockery in such a
way that no crockery parts
protrude over the crockery
basket and prevent the
appliance door from closing
properly.
Troubleshooting
Clean the "seven" → Page 41.
1.
2.
Clean the "drain pump"
→
Page 56.
▶
Wait for the end of the program
or cancel the program with Reset
off.
→ "Abort program",
▶
Page 34
Wait for the software update to be
▶
completed.
Unplug the appliance from the
1.
mains socket or switch off the
fuse.
Wait at least 2 minutes.
2.
53