Installing The Display On A Stand; Using Smart Mobile Stands; Using A Third-Party Stand - Smart Technologies SMART Board 6000S Series Installation And Maintenance Manual

Chapter 2 Installing the display
If you mount multiple displays side by side, you can connect them with RS-232 cables to turn on, turn off,
and otherwise operate all of the displays from the first display's convenience panel.
The leftmost display (when viewed from the front) is the first display:
Important
Use only standard RS-232 cables. Do not use null modem cables.
Note
For more information about using RS-232 cables for remote management, see Appendix D Managing
SMART Board 6000S (C) or 6000S series displays using RS-232 on page 85.

Installing the display on a stand

If you want to move the display from place to place or if it's not possible to install the display on a wall,
you can install it on a stand.

Using SMART mobile stands

SMART mobile stands are designed for SMART interactive displays. They are height-adjustable. Some
models include integrated speakers, a locking cabinet to secure equipment, and casters that swivel and
lock for easy movement.
For more information about SMART mobile stands, see smarttech.com/accessories.

Using a third-party stand

For information on selecting and using a third-party stand, see Installing your SMART Board 6000S on a
stand.
smarttech.com/kb/171414 27