To Match Light The Grill - Jenn-Air 740-0165 (LP) Manual

TO MATCH LIGHT THE GRILL

If the burner will not light after several attempts using the control knobs, the burner may be lit
with a match.
1. If you have already attempted to light the burner with the igniter, allow 5 minutes for any
accumulated gas to dissipate.
2. Insert a match into the lighting rod. Ignite the match and insert through the cooking grids to
the burner.
3. Press and turn the control knob to the "HI" setting, continue to press the knob until the
burner ignites. The burner should light immediately.
4. If the burner does not ignite within 4 seconds, turn the control knob to the "OFF" position.
Wait 5 minutes and try again.
CAUTION
When lighting, keep your face and body as far
from the grill as possible.
CAUTION
When using a match to light the grill make
sure to use the attached lighting rod.
Lighting Rod