Table of Contents
Advertisement
10.6
selecting Desired massage action
All models incorporate a massage selector valve that
allows you to customize the massage and performance
by diverting water between various jet systems within
the spa. Simply turn valve to positions A, B or C to
divert water pressure to various jet groups.
note: The valve is intended to operate in positions A (Combo), B, or C
for optimum performance. It is considered normal for sound levels within
the valve to increase between these positions due to the large amounts
of water flowing through it. For optimum filtration benefits, always leave
this valve in position A when the spa is covered and select positions B or
C for maximum jet performance during spa use.
10.7
waterfall Feature
The waterfall is on when jets pump 1 is
running.
note: The waterfall does not have an on/off control valve.
10.8
air Controls
Certain jet systems have their own "toggle" on/off air control.
Each control introduces air into the water lines that supply
specific jet groups. Simply press any air control button
Jacuzzi logo side down to open or press the opposite side
of button to close.
note: To minimize heat loss, close all air controls (Jacuzzi logo up) when
spa is not in use. Certain jets may not draw air when jets pump 1 is
running in low speed; this is considered normal.
10.9
optional audio system
Spas equipped with the optional Jacuzzi audio system
offer enhanced enjoyment. These models include an
integrated AM/FM/CD receiver with high-quality marine
speakers for unsurpassed sound quality and long-life.
Refer to Section 17.0, (page 48).
LX Collection
A
B
C
V
A
C
T I
A
U
Q
A
3
F -
R
-
Q
A
29
Advertisement
Table of Contents
Troubleshooting
