Spa Fill Up Procedure - Jacuzzi LX J - LX Owner's Manual

Figure C
RED
BLK
Green
north american 240v models:
240 VAC, 3-Wire Connection 60 Hz
8.0

spa Fill up procedure

For best results, read each step in its entirety before proceeding with that
step.
1. prepare The spa For Filling
• Clear all debris from the spa. (Although the spa shell has been
polished at the factory, you may want to treat it with a specially
formulated spa cleaner.) Consult your authorized Jacuzzi dealer for
additional information prior to filling spa.
• Remove filter cover, then remove filter cartridge as outlined in
Section 12.1 (page 33).
2. Fill spa
• Place the end of your garden hose into the empty filter bucket.
CauTIon: To DeCrease BuIlD up on ComponenTs anD
mInImIZe aCrYlIC DamaGe.
Never fill with water from a water softener. If your water is extremely
"hard", it is preferable to fill half-way with hard water and the rest of
the way with softened water. Water that is too soft can be corrosive
to metal components.
!
warnInG:
•
DIsease.
Fill hot tub with clean tap water from garden hose, to reduce risk of
contracting a waterborne illness (e.g. an infection, bacteria or virus)
and/or respiratory ailments. Fill until water covers all jets but does not
touch the bottom of the lowest headrest. (DO NOT OVERFILL!)
RED
TB1
RED
1
BLK
BLK
2
to Circuit
Board
TB3
To DeCrease rIsK oF InFeCTIon or
Figure D
1
2
Green
all export models:
230 VAC, 3-Wire Connection 50 Hz
LX Collection
BLUE
TB1
BLUE
BROWN
BROWN
to Circuit
Board
TB3
15