Venting Arrangements - Regency C34 Classic Owners & Installation Manual

installation
|
26

VENTING ARRANGEMENTS

HORIZONTAL TERMINATIONS FOR ALL
VENTING SYSTEMS
The shaded areas in the Diagram below show all allowable com-
binations of vertical runs with horizontal terminations. Maximum
one 90 elbow (two 45 elbows equal one 90
O o
Propane and Natural Gas: Residential, Manufactured
and Mobile Homes Installations
The venting arrangements diagrammed below, have a min. of 75% (flue
loss) efficiency with Fan Off, as required for manufactured homes. (Actual
efficiency may be as high as 85%)
May be installed in Manufactured (Mobile) Homes after first sale.
NOTE: See "Vent Restrictor Position" section for installation instructions for the Vent Restrictor Position.
Venting Arrangements Examples:
Example A) Venting has a horizontal termination.
A 7 ft. vertical run with 6 ft. horizontal run does not fall within the shaded area, and therefore is an allowable installation with
the factory set vent restrictor position of "C".
Example B) Offset to Vertical Vent.
A 15 ft. vertical run with 4 ft. horizontal offset distance falls within the shaded area and is an allowable installation with Vent
Restrictor Position "R" (Right).
26 |
Regency ® CLASSIC™ C34-11 Direct Vent Freestanding Gas Stove
VENTING ARRANGEMENTS
VERTICAL TERMINATION SYSTEMS FOR RESIDEN-
TIAL MANUFACTURED AND MOBILE HOMES
The shaded area in the Diagram below shows all allowable combi-
nations of straight vertical and offset to vertical runs with vertical
terminations. Maximum two 45
elbow).
o
All vertical and offset to vertical vent installations require Vent Restrictor
Position "R" (Right). If the vent is ENCLOSED in a chase (min. size 9" x
9") maintain a 1-1/4" clearance to combustibles.
o
May be installed in Manufactured (Mobile) Homes after first sale.
Straight Vertical and Offset to Vertical Terminations
use Vent Restrictor Position "R" (Right)
elbows.