Table of Contents
Advertisement
Hardware Features
and Installation
This section covers the following material:
•
•
•
•
•
•
Pay careful attention to the order and types of setup tasks. Follow the setup checklist in this
guide or in the setup guide and keep it with you for reference throughout the installation and
configuration process.
Setup Checklist
Get Ready
…
…
Setup Checklist
— A checklist of tasks to guide you through installation
Network Communication Setup
Features
— Locations and some descriptions of items on the front panel
Mounting
— Guidelines for mounting
Cabling, Addressing, Features, and Connections
cabling notes for rear panel features and corresponding front panel indications
Resetting the Unit
— Information about the available reset modes and how to reset
the IPL EXP
Familiarize yourself with the features of the IPL EXP PDU4H (see
on page 11 and
Cabling, Addressing, Features, and Connections
and of any IPCP Pro xi Series control processors, TouchLink Pro touchpanels, or button
panels that will be part of the system.
Download and install the latest version of the following:
…
Toolbelt software — for discovering the control processor, IPL EXP PDU4H,
and other control products on the network, for managing core settings, and for
upgrading firmware when needed.
…
Global Configurator (GC) software — for configuring the control system.
…
Global Scripter software — for programming the control processor and
expansion interfaces (as an alternative to GC)
…
GUI Designer software — for designing layouts for Extron TouchLink Pro
touchpanels and third‑party touch interfaces
All are avail able from
www.extron.com
the Extron Website
on page 38).
— A flowchart guide to network settings configuration
— Locations, descriptions, and
(see
Locating Software and Firmware on
IPL EXP PDU4H • Hardware Features and Installation
Front Panel Features
on page 14)
7
Advertisement
Table of Contents
