Extron electronics IP Link Pro xi IPL EXP PDU4H User Manual page 39

Command Function
Ethernet data port timeout period
Set the current Ethernet port
connection timeout period
View current Ethernet timeout
X6(
KEY: = The number of seconds before timeout on IP connections: (minimum =
data is received during the timeout period, the Ethernet connection is closed. Each step is
is returned with leading zeros.
IP setup commands
Set the name of the unit
24
Set the name of the unit to the
factory default name
24
View the unit name
Set DHCP client on
24
Set DHCP client off
24
View DHCP status
NOTE: Changing DHCP (IPv4) from on to off resets the IP address, subnet, and gateway address to the factory defaults. Also, if DHCP is on, but
the server does not supply an address, the unit creates a link local address and can also use the factory default IP address.
View MAC address
X1@
KEY: = Unit name
X1#
= Date and time format
X1*
= Hardware (MAC) address
X1(
= Subnet mask
X4(
= Default unit name
X8#
= Enabled/disabled status
X57^
= NIC (Network Interface Card) number (
SIS Command Response
(Host to Unit) (Unit to Host)
E X6( }
0* TC Pti0*
E } X6(]
0TC
E X1@ }
CN Ipn•
E }
•CN Ipn•
E } X1@]
CN
E }
1DH Idh1
E }
0DH Idh0
E } X8#]
DH
X1*]
E X57^ }
CH
Verbose mode 2/3: Iph•
A text string up to 63 characters drawn from the alphabet (A‑Z), digits (0‑9), minus sign or hyphen (‑).
No blank or space characters are permitted as part of a name. No distinction is made between
upper and lower case. The first character must be an alpha character. The last character must not
be a minus sign or hyphen.
MM/DD/YY-HH:MM:SS
For set commands:
For read commands: (
Wed, 22 Jan 2022 10:54:00
Example:
00-05-A6-xx-xx-xx
xxx.xxx.xxx.xxx
. Leading zeros in each of 4 fields are optional in setting values, and are
suppressed in returned values. Default =
The name is a combination of the model name and last three pairs of the MAC address (such as
IPL-EXP-PDU4H-00-02-3D
0 1
= disabled, = enabled
1-3
). If a NIC number is not applicable to the product, the unit returns an E13 error code.
1
= LAN NIC
IPL EXP PDU4H • Modes of Operation, SIS Control and Configuration
Additional description
X6(]
Set the number of seconds to wait
without receiving data before the IP
connection times out (the unit closes the
Ethernet connection).
1 65000
, maximum =
10
seconds. Applicable to Ethernet only. The response
X1@]
Set the name (
will be identified in its embedded web
page and in software.
X4(]
The name is the model name followed by
the last three pairs of the MAC address
IPL-EXP-PDU4H-XX-XX-XX
(
]
]
X57^ X1*]
*
01/12/22- 10:54:00
. Example:
day of week, date month year HH:MM:SS
.
255.255.0.0
.
).
30 300
, default = = seconds). If no
X1@
) by which this device
).
.
).
31