Installation Procedures - Motorola PMLN6521 Installation Manual

INSTALLATION PROCEDURES

OPERATIONAL CAUTION
!
a u t i o n
• An air bag inflates with great force. DO NOT place objects,
including communications equipment, in the area over the air
bag or in the air bag deployment area. If the communication
equipment is improperly installed and the air bag inflates, this
could cause serious injury.
If necessary, contact the vehicle manufacturer for air bag
information specific to the vehicle.
• Verify that none of the vehicle's systems are affected by use of
the TETRA Handportable Terminal e.g. cruise control, ABS
braking, traction control, engine management, direction
indicators, lights etc.
• Use existing openings through the bulkhead to avoid drilling. If
drilling is a must, verify that no damage is done to the Vehicle
Electronic Control Modules (ECMs), fuel pipes, brake pipes and/
or cable looms.
VEHICULAR CHARGING CRADLE/RADIO
HOLDER INSTALLATION
Note: Always use the supplied fastening hardware to rigidly
secure the cradle. An unsecured cradle could cause a unit
to move and interfere with the proper operation of the
vehicle and the charging cradle/radio holder must be
mounted in such a way that the TETRA Handportable
terminal is within easy reach of the driver during normal
operation of the vehicle.
Sufficient room should be allowed to permit the insertion of
the TETRA Handportable terminal and provide easy access
to the release mechanism of the TETRA Handportable
terminal from the cradle/holder.
6