Installation - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

Cisco Wi-Fi Interface Module (WIM)
LED Status
Solid Blue
Solid Green
Flashing Green
Flashing Blue
Alternate between Green and
Red
Cycle through
Red-Off-Green-Off-Blue-Off

Installation

The Cisco Wi-Fi Interface Module remove and replace options are shown in the following steps.
The Router may have a blank plate covering the Wi-Fi Interface Module slot. This will need to be removed
prior to installing the Wi-Fi Interface Module. The following example shows the Wi-Fi Interface Module.
Procedure
Step 1
Remove the blank plate by unscrewing the latch lock screw(1) that holds the plate secure. Refer to the following
graphic.
Status Type
Association Status
Boot Loader Status
Boot Loader Status
Operating Status
Operating Status
Access Point operating system
error
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
Description
Normal operating condition, at least one
wireless client associated.
Executing Boot Loader
Boot Loader Error, signing verification error.
Software upgrade in progress.
Discovery/Join process is in progress.
General warning; insufficient inline power.
Installation
59