This Device Meets The Industry Canada Guidelines For Exposure To Radio Waves; Ised Radiation Exposure Statement; Additional Information On Rf Exposure - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves

1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Device Meets the Industry Canada Guidelines for Exposure to Radio
Waves
The IR1800 Series includes a radio transmitter and receiver. It is designed to not exceed the limits for exposure
to radio waves (radio frequency electromagnetic fields) as referenced in Health Canada Safety Code 6. The
guidelines include a substantial safety margin designed into the limit to ensure the safety of all persons,
regardless of age and health.
As such the systems are designed to be operated so as to avoid contact with the antennas by the end user. We
recommend that you set the system in a location where the antennas can remain at leastat a minimum distance,
as specified, from a user in accordance with the regulatory guidelines that are designed to reduce the overall
exposure to a user or operator.
Separation Distance
MPE
1.1 mW/Cm2 with Simultaneous Transmission of Dual Cellular Modem,
2.4-GHz Wi-Fi and 5-GHz Wi-Fi.
Note Health Canada states that present scientific information does not indicate the need for any special precautions
for the use of wireless devices. They recommend that if you are interested in further reducing your exposure,
you can easily do so by reorienting antennas away from users by placing the antennas at a greater distance
than recommended, or by lowering the transmitter power output.

ISED Radiation Exposure Statement

This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 30cm between the
radiator & your body.
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement
non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 30cm de distance entre la source
de rayonnement et votre corps
Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
CAN ICES-3 (A)/NMB-3(A)
The Country Code Selection feature is disabled for products marketed in the US/Canada.

Additional Information on RF Exposure

You can find additional information on RF exposure in the following links:
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
98
Regulatory Compliance
Distance Limit
30 cm (11.8 inches) 1.00
mW/cm2