Mounting The Din Rail Bracket On The Router (Vertical) - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

Mounting the DIN Rail Bracket on the Router (Vertical)

Step 2
Slide the plastic latches (4) above the spring and backwards into the DIN rail plate opening.
Step 3
Push each plastic latch (4) backwards and insert the DIN rail clamp (2) into the DIN rail plate opening. Fasten
each clamp with screws (1), using 12 in-lbs of torque.
Step 4
Reattach the two DIN rail clips (5) to the mounting bracket in a vertical orientation using 9 in-lbs of torque.
Mounting the DIN Rail Bracket on the Router (Vertical)
Procedure
Step 1 Attach the DIN rail bracket to the back of the router, as shown in the following figure.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
34
Installing the Router