Pluggable Modules; Cellular Pluggable Interface Module (Pim); Ssd Module; Gps Module - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual

Product Overview
Item Description
2 Pluggable Interface Module 0/4/0 (PIM)
3 Pluggable Interface Module 0/5/0 (PIM)

Pluggable Modules

The following subsections provide details on the different modules that can be plugged into the IR1800 Series
Routers.

Cellular Pluggable Interface Module (PIM)

The Cellular Pluggable Interface Module (PIM) is a pluggable unit used to connect to a wireless (LTE)
interface. For more information about the PIM, see

SSD Module

The IR1800 supports one Solid State Drive (SSD) module. For more information see
65.

GPS Module

The IR1800 supports one GPS module. This module is used in addition to the ones integrated in the pluggable
LTE module for more accurate dead reckoning performance.
For more information about the module see

SFP Modules

Warning
Class 1 laser product. Statement 1008
The IR1800 Ethernet SFP module provides connections to other devices. These field-replaceable transceiver
modules provide uplink interfaces. Local connectors provide the fiber-optic connection. RJ-45 connectors
allow copper connections. You can use any combination of the supported SFP modules listed in the following
table.
Table 3: Supported Gigabit Ethernet SFPs
Gigabit Ethernet Distance
SFP
GLC-SX-MM-RGD 220-550 m
Fiber Commercial Extended
0C to +70C -5C to
+85C
MMF — —
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
Pluggable Interface Modules, on page
GPS Field Replaceable Unit Module, on page 69
Industrial Digital Optical Monitoring
-40C to
+85C
YES —
Pluggable Modules
43.
SSD Module, on page
.
15