Assign Loud Bell - Samsung OfficeServ 500 Programming Manual

[205] ASSIGN LOUD BELL

Designates the station that controls the loud bell ring output of a MISC board. Each MISC
board can have up to a loud bell outputs.
The loud bell will follow the ring cadence of the designated station. Only a station can be
assigned to control the loud bell; a station group cannot be assigned.
CONDITIONS
The loud bell will follow the ring cadence of the designated station. Only a station can be
assigned to control the loud bell; a station group cannot be assigned.
DEFAULT DATA
UNASSIGNED
ACTION
1) Press Transfer button and enter 205.
Display shows current setting.
2) Dial loud bell number.(e.g., 3902)
OR
Use Volume button to scroll through loud bell
numbers and press Right Soft button to move the
cursor.
3) Enter station number.(e.g., 201)
OR
Press Volume button to make selection and
press Right Soft button to return to step 2.
4) Press Transfer button and enter to exit.
OR
Press Speaker button to advance next MMC.
RELATED ITEMS
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
DISPLAY
[3901]LOUD BELL
RING PAIR:NONE
[3902]LOUD BELL
RING PAIR:NONE
[3902]LOUD BELL
RING PAIR:201
2-51