Auto Record - Samsung OfficeServ 500 Programming Manual

[752] AUTO RECORD

This MMC is only used for the Samsung Plug in Voice Mail Card.
Some specific station in the phone system can be assigned to automatically record
conversations. When this option is set, all incoming, all outgoing, or all calls(incoming or
outgoing) can be recorded.
When this option is selected a specific port can be assigned for each station set to automatic
conversation recording or the effectiveness of this feature cannot be guaranteed.
In this MMC you can assign:
Station number: Which station use this feature.
Mailbox number: What mailbox the conversation are recorded in.
I, O or B: What type of conversations are recorded, in, out or both.
Voice mail port number: What port is dedicated to the station.
A maximum of 8 stations can this feature in the system.
The same port cannot be assigned to more than one station. Attempts to do this will result
in an error message.
When using the auto record feature
Before using the auto record feature make sure that you are not violating any
state or federal laws. Some states require that the recorded party be notified.
SAMSUNG is not responsible for any illegal use of this feature.
CONDITIONS
When a Voice Mail port is assigned here, it is automatically removed from the Voice Mail
group defined in MMC 601.
DEFAULT DATA
NONE
© SAMSUNG Electronics Co., Ltd.
OfficeServ 500 Programming Guide
2-303