Gk Options - Samsung OfficeServ 500 Programming Manual

[836] H.323 GK OPTIONS
Provides a means to set the H.323 gatekeeper parameters for an optional external industry-
standard H.323 network gatekeeper, using Registration, Admissions, and Status signaling
(RAS). The settings are system wide.
When changing IP
When changing any IP address/value, listed below, three digits must be input for
each(octet) field. Example 192.168.1.10 input must be: 192 168 001 010
No Parameter
00 GK CONNECTION
01 GK ROUTING
02 GK IP ADDRESS
03 GK NAME
04 ALTER GK IP
ADDR
05 H.323 GATEWAY
ID
06 E.164 GATEWAY
NO
07 GK KEEP ALIVE
08 GK DOWN ROUTE
09 GK RAS TYPE
11 URQ REASON
MODE
12 RRQ FAIL TIME
13 GRQ SEND
© SAMSUNG Electronics Co., Ltd.
Description
This enables or disables the H.323 call to connect to
a gatekeeper.
This enables or disables routing of calls through a
gatekeeper.
This is gatekeeper's IP address.
This is alphanumeric name identifier of the
gatekeeper. An entry of 16 characters.
This provide for an alternate gatekeeper address.
This is the H.323 identifier used by the MGI when
registering with the gatekeeper. This can be up to 32
characters.
This is the E.164 identifier used by the H.323 trunk
when registering with the gatekeeper. This can be up
to 16 digits in length.
This is the timer that the MGI uses to acknowledge
the presence of the gatekeeper. The range is
000~999 seconds.
This provides an alternate route in case the primary
gatekeeper is down. Selections are PSTN or ALTER
GK.
Select if AUTO or MANUAL, depending on your
gatekeeper's capabilities.
Select ON or OFF for usage of Un-register Request
RAS(URQ) messages.
Programs the time frame to re-send Registration
Request RAS(RRQ) messages to a gatekeeper.
The range is 1~99.
Select ON or OFF for usage of Gatekeeper RAS
Request(GRQ) messages.
OfficeServ 500 Programming Guide
Default
DISABLE
DISABLE
0.0.0.0
'Gatekeeper'
0.0.0.0
'OfficeServ'
1234
0 sec
PSTN
AUTO
ON
30 sec
OFF
2-375