Mgi Group - Samsung OfficeServ 500 Programming Manual

[615] MGI GROUP

This optional program sets designated MGI ports for specific services. This allows
'grading' of MGI card(s) for traffic conditions. The MGI ports can be segregated into
groups. Keep in mind that any entries made here can be ineffective,
if conflicting entries exist in MMC616.
No Type
0 LOCAL ITP
1 PUB IP ITP
2 VOIP NTWK
3 PUB IP NTWK
4 VOIP TRUNK
5 PUB IP TRK
6 MGI3 NEEDED
7 PUB IP MGI3
8 ITP PAGED
The MGI ports can be allow two selection modes: Sequential or Distributed.
The members of each selection are the actual ports on the MGI card(s).
CONDITIONS
NONE
© SAMSUNG Electronics Co., Ltd.
This determines what MGI ports can be used with ITP phones across a
private IP network
This determines what MGI ports can be used with ITP phones on a
public IP network.
This determines what MGI ports can be used for enhanced proprietary
Samsung VoIP networking between OfficeServ 500 systems across a
private IP network.
This determines what MGI ports can be used for enhanced proprietary
Samsung VoIP networking between OfficeServ 500 systems on a public
IP network
This determines what MGI ports can be used as industry-standard
H.323 or SIP VoIP trunks for communications across a private network
This determines what MGI ports can be used as industry-standard
H.323 or SIP VoIP trunks for communications on a public network
This determines what MGI ports can be used for T.38 facsimile
communications across a private network.
This determines what MGI ports can be used for T.38 facsimile
communications on a public network.
This determines what MGI ports can be used with station page to ITP
phones across a private IP network
OfficeServ 500 Programming Guide
Description
2-211