Samsung OfficeServ 500 Programming Manual page 205

Hide thumbs Also See for OfficeServ 500:
Table of Contents

Advertisement

Timer Name
DISA NOANS DISC.
DISA PASS CHECK
DISPLAY DELAY TM
DOOR LOCK
RELES.
DOOR RING
DETECT
DOOR RING OFF TM
E-HOLD RECALL TM
FIRST DIGIT TIME
HOK FLASH MAX TM
HOK FLASH MIN TM
HOOK OFF TIME
HOOK ON TIME
INQUIRY RELEASE
© SAMSUNG Electronics Co., Ltd.
Default
Range Unit
30
0-250 SEC
30
1-250 MIN
2
1-250 SEC
500
100-2500
MSEC
50
10-250
MSEC
30
1-250 SEC
45
0-250 SEC
10
1-250 SEC
800
20-2500
MSEC
350
20-2500
MSEC
100
20-2500
MSEC
1000
20-2500
MSEC
30
1-250 SEC
OfficeServ 500 Programming Guide
Description
This timer controls the duration of time a
DISA call is disconnected by force when
called party does not answer.
This timer defines the time period before
the system clears the incorrect passcode
counter.
This timer controls the duration a display is
shown in the LCD display. This timer also
controls the duration of time that error tone is
heard.
This timer controls the duration of time the
door lock relay will be activated.
This timer controls the duration of time
before a call is answered by the door
phone.
This timer controls the duration of ringing at
the door ring destination before
automatically cancelling.
This timer controls the duration of time a
call is held exclusively at a station before
recalling.
This timer controls how long the system will
wait for dialling to begin before dropping
the dial tone and returning the you to error
tone.
This timer monitors the duration of a hook
switch flash to ensure that the flash is valid
and not a line noise or an accidental
hookswitch bounce LONGEST duration.
This timer monitors the duration of a
hookswitch flash to ensure that the flash is
valid and not a line noise or an accidental
hookswitch bounce SHORTEST duration.
This timer controls the time before dial tone
is sent to a single line station.
This timer sets the minimum amount of
time that the system will recognize as an
SLT hang up.
This timer monitors the duration of the
interaction of the Soft button to determine
when to return the LCD back to a normal
status. This timer affects only display
phones.
(Continued)
2-163

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents