Cost Rate - Samsung OfficeServ 500 Programming Manual

CHAPTER 2. Ошибка! Стиль не определен.

[433] COST RATE

In this MMC, the TRUNK COST RATE flags are entered for each trunk.
DIAL PLANs are defined in MMC 748 Costing Dial Plan. RATE CALCULATION
TABLES are defined in MMC 749. Each trunk may be defined with up to eight cost rates.
Enter one or more of the eight COST RATES per trunk. If an entry is left blank, no call
costing will be calculated for that particular DIAL PLAN.
Call type 8 is fixed for incoming. Apply a cost rate under type 8 only to a trunk if you want
incoming call costing.
CONDITIONS
NONE
DEFAULT DATA
ALL TRUNKS/ALL DIAL PLANS NO COST RATE ASSIGNED
ACTION
1) Press Transfer button and enter 433.
Display shows trunk number and Cost Rate
table numbers:
2) Dial trunk number.(e.g., 705)
OR
Press Volume button to select trunk and press Right
Soft button to move cursor.
OR
Press ANS/RLS button for all.
3) Press Volume button to move cursor along the line until
the cursor is under the Cost Rate mark.(e.g., 2)
Enter 1 for YES or O for NO and press Right Soft
button to return to step 1.
4) Press Transfer button and enter to exit.
RELATED ITEMS
MMC 748
MMC 749
2-154
COSTING DIAL PLAN
RATE CALCULATION TABLE
DISPLAY
[701] :12345678
CR :00000000
[705] :12345678
CR :00000000
[701] :12345678
CR :01000000
© SAMSUNG Electronics Co., Ltd.