KTM 125 XC-W 2018 Setup Instructions page 27

3.22 Fuel tap
3.23 Setting the kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
The fuel tap is on the left side of the fuel tank.
Open or close the supply of fuel to the carburetor using tap han-
1
dle on the fuel tap.
Possible states
Fuel supply closed OFF – Fuel cannot flow from the fuel tank
•
to the carburetor.
Fuel supply open ON – Fuel can flow from the fuel tank to the
•
carburetor. The fuel tank empties down to the reserve level.
Fuel reserve supply open RES – Fuel can flow from the fuel
•
tank to the carburetor. The fuel tank empties completely.
V00326-10
Condition
The motorcycle is stationary.
–
Repeatedly press the button
bottom right of the display.
–
Press the button
The Setup menu is displayed and the active functions are
shown.
–
Repeatedly press the button
Setting the Km/h
–
Press the button
Setting the Mph
400329-01
–
Press the button
–
Wait 3 - 5 seconds.
The settings are stored.
Info
If no button is pressed for 10 -12 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
briefly until H appears at the
for 2–3 seconds.
briefly until Km/h/Mph flashes.
.
.
3 WORK
25