3.15
Removing the headlight mask with the headlight
3.16
Installing the headlight mask with the headlight
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
(125 XC‑W EU)
–
Press and hold the kill switch
until the engine stops.
(150 XC‑W US)
–
Press and hold the kill switch
until the engine stops.
–
Detach the brake line and wiring harness from the headlight
mask.
–
Release rubber bands
E00355-10
swing it forward.
–
Detach plug-in connector
with the headlight.
E00357-10
Main work
–
Connect plug-in connector
E00357-11
–
Position the headlight mask and fix it with rubber bands
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line
guide.
E00355-11
Finishing work
–
Check the headlight setting. (
p. 21)
p. 22)
while the engine is idling
while the engine is idling
1
. Slide the headlight mask up and
2
and take off the headlight mask
1
.
p. 22)
3 WORK
2
.
21