Grizzly G0704 Owner's Manual page 26

cross Handwheel: moves the table forward and
backward (y-axis).
Longitudinal Handwheels: move the table from
side to side (X-axis).
Longitudinal Table Locks: lock the longitudinal
position of the table when tightened.
cross Table Locks: lock the cross position of
the table when tightened.
longitudinal
table locks
Cross handwheel
figure 20. table controls.
Spindle RpM Readout: displays the speed of
the spindle rotation.
Emergency STOp button: interrupts the flow of
power to the machine.
variable Spindle Speed Knob: Changes the
speed of the spindle rotation.
Spindle Direction Selection Knob: Changes
the direction of spindle rotation.
spindle rpm readout
emergency
stop button
variable spindle
speed Knob
spindle direction
selection Knob
figure 21. Control panel.
-24-
longitudinal
handwheels
Cross table locks
Off button: turns OFF the display.
ON/0 button: turns ON the display with the
first press. pressed again resets the display to
0.000".
IN/MM button: toggles the units displayed.
button: increases the current depth reading.
button: decreases the current depth reading.
oFF button
in/mm button
button
button
figure 22. digital readout unit controls.
model g0704 (mfg. since 08/11)
on/0 button