Setup; Equipment; Grounding - Graco King E60 Operation

Setup

Setup Setup
See Driver Installation manual for power requirements
for hazardous locations/explosive atmospheres.
Installation of this equipment involves potentially
hazardous procedures. Only trained and qualified
personnel who have read and who understand
the information in this manual should install this

equipment.

Install Install Install Vented Vented Vented Oil Oil Cap Oil
Equipment Equipment Equipment
The temporary unvented cap (PX) prevents oil
leaks during shipment. This temporary cap must be
replaced with the supplied vented oil cap (P) before
use.
ti31010a
3A8124A
Cap Before Cap Before Using Before Using Using

Grounding

Grounding Grounding
This equipment must be grounded to reduce the
risk of static sparking and electric shock. Electric
or static sparking can cause fumes to ignite or
explode. Improper grounding can cause electric
shock. Grounding provides an escape wire for the
electric current.
Driver: The driver is grounded through the power
Driver: Driver:
cord.
Driver (optional (optional secondary): secondary): Two ground terminals
Driver Driver (optional secondary):
are provided if local code requires redundant
grounding connections.
Loosen the ground screw (ZZ) and attach a ground
wire (Graco part 244524 - not supplied). Tighten the
ground screw securely. Connect the other end of the
ground wire to a true earth ground.
Setup
7