Table of Contents
Advertisement
Setup
N
M
Key:
M
Auxiliary Bypass Connection
N
Power Cord
P
Fluid Outlet
Q
Pressure Adjuster
R
On/Off Power Switch
S
Hose Electrical Receptacle
F
. 3: T5 Connections and power supply
IG
309831D
P
S
R
Q
Mounting hot melt tank
Bolt the hot melt tank securely to appropriate surface.
Bolt holes are provided on the base of the tank. Make
sure to mount tank where hose fittings are accessible
with wrenches.
Connecting hose
WARNING
To avoid accidental system pressurization or
electrical shock, disconnect power cord and turn
the ON/OFF switch to OFF.
WARNING
To prevent hose damage, do not flex hose when
cold. When hot, the hoses have a minimum bend
diameter 16 in. (40.64 cm)
115 VAC tanks can support up to 16ft. (7.32 m)
of total hose.
For hoses that are available, see hose chart on
page 4.
Setup
9
Advertisement
Table of Contents
