Recall Only Memories In The Same Frequency Band; Using The Memory Auto Grouping (Mag) Function - Yaesu FTM-200DR Operating Manual

Memory list mode that automatically displays the memory channel list
Turning the DIAL knob in memory mode usually increases or decreases the memory
channel number. Rotating the DIAL knob automatically displays the memory channel
list and allows recalling the desired memory channel while checking the contents of
the listed memory channels.
Setting
1. Press and hold the [F
the DIAL knob.
2. Rotate the DIAL knob to select [ON].
3. To return to the normal operation screen from the Function List, press a key other
than the power switch or PTT.
To return to normal up / down operation, set "OFF" in step 3 of the above operation.
Operation
1. When the DIAL knob is turned in the memory mode, the memory channel list is
automatically displayed.
Press the [BAND
memory auto grouping (MAG) function (see below).
2. Rotate the DIAL knob to select the desired memory channel and press the DIAL
knob.
3. The memory channel is recalled.
Recall only memories in the same frequency band (Band)

using the memory auto grouping (MAG) function

With the memory auto grouping (MAG) function, only memory channels in the same
frequency band (Band) can be called.
In the memory mode, each time the [BAND
pressed, only memory channels of the specified frequency
band are automatically recalled as a group, as shown below:
All memory channels
174MHz - 400MHz
480 MHz - 999.995MHz
memory channel
When " " is selected, the MAG function is turned Off and all memory channels can be
recalled.
40
] key → select [19 MEMORY LIST MODE] and press
MENU
] key to switch to the display for each frequency band by the
GRP
400MHz-480MHz
memory channel
] key is
GRP
（AIR Band）
108MHz - 137MHz
memory channel
137MHz-174MHz
memory channel
Press