Pmg-Sr; Group Activity Monitor) - Yaesu FTM-200DR Operating Manual

PMG-SR (Single Receiver Primary Memory Group Activity Monitor)
The PMG function that displays the receive status of registered channels in a bar graph
allows registration of up to 5 channels by pressing and holding the [PMG
current display frequency of either the VFO or the memory channel. The PMG screen can
be switched to auto mode or manual mode by pressing the DIAL knob.
In auto mode, the PMG channel is continuously scanned, the channel with the signal is
automatically stopped and the signal is heard. When the signal is concluded, the scan
is automatically restarted. To operate on the received channel, press the PTT or DIAL
knob to switch to manual mode, and the channel is fixed for communication.
Current Frequency
(VFO or Memory Channel)
YAESU MUSEN
z Register the frequency to PMG
Display the frequency of the VFO or memory
channel, then press and hold the [PMG
key. The frequency is registered in PMG and
the PMG screen is displayed.
z Display the PMG screen
Press the [PMG
screen.
Press the DIAL knob to switch between Auto
Mode and Manual Mode.
Auto Mode:
Scans and automatically stops at the channel
with a signal and outputs the received audio.
During output, the bar graphs of the other chan-
nels hold the last reception status and pause.
When there is no signal, scanning is resumed
and the receive status is displayed in real time.
(The channel number flashes during scanning
and there is no audio from the speaker.)
Manual Mode:
It is fixed to the channel selected by the DIAL
knob, and when there is a signal, the received
audio is output.
When there is no signal on the selected channel,
it scans and displays the receive status of other
channels in real time. (Even if there is a signal
on another channel, the received audio is not
output.)
the [PMG
] key to display the PMG
PW
Press
] key
PW
to call up
YAESU MUSEN
to return
In auto mode, the channel with the signal is scanned
and automatically stopped to play the signal. (The
all channel number flashes during scanning)
Press and hold: Register or unregister
]
PW
Press DIAL knob to switch Auto Mode / Manual Mode
z Cancel the frequency registered in PMG
Select a channel on the PMG screen
and press and hold the [PMG
....................... page 45
] key for the
PW
PMG Screen
(Auto Mode)
Press: Recall or exit PMG
Rotate DIAL knob to select
Press and hold: Unregister
] key.
PW
9