Bluetooth ® Received Audio Output - Yaesu FTM-200DR Operating Manual

z Remove a registered (paired) Bluetooth
1. In step 2 above, rotate the DIAL knob to select the Bluetooth
2. Press the [F menu] key.
3. Rotate the DIAL knob to select [DEL], then press the DIAL knob.
4. The Bluetooth
Bluetooth received audio output
®
When a Bluetooth
®
from the headset only, or from both the headset and the transceiver speaker.
1. Press and hold the [F menu] key.
2. Rotate the DIAL knob to select [Bluetooth], then press
the DIAL knob.
3. Rotate the DIAL knob to select [AUDIO], then press the
DIAL knob.
4. Rotate the DIAL knob to select "AUTO" or "FIX".
AUTO : The received audio comes from only the
Bluetooth headset.
: The received audio comes from both the
FIX
Bluetooth headset and the speaker of this
transceiver.
Factory default value: "AUTO".
5. Press any key (except Power Switch) or PTT switch to
finish the setting and return to the original screen.
56
headset is deleted from the device list.
®
headset is connected, the received audio can automatically be output
device from the list
®
®
Press and hold
OPTION
107 Bluetooth
DEVICE
STATUS STATUS
SAVE
AUDIO
headset to be deleted.
Disconnected Connected
OFF
AUTO